_______
18-04-2013
__

I have modded my XFX 1000W psu, se more here:

Modding my XFX 1000W power supply

_______
26-04-2013
__

I have started on my new build, the build will be build around a Bitfenix Prodigy case in black.

The motherboard will be from a Shuttle SX79R5.
With a LGA2011 Intel I7 3820
2 x EVGA GTX480 Hydro Copper
16GB Corsair Red series
Samsung SSD 830 256GB and some other HDD’s
XFX 1000W 80+ Pla. PSU
3 radiators, a 200mm, a 240mm and a 140mm
My fancontroller, the Aquacomputer aquaero 5 PRO

More will come next weekend or soo 😉

_______
06-05-2013
__

Got some new stuff, and done some more modding, the 240mm rad can be inside the case 🙁 Så I have fittet it on the top, and used e MNPCTECH fan grill on top of it.
A 140,, Fan has been installed on the back.
The mounting for my fan controller has been painted black (blank silver before)
The new 200mm fan have been installed on the 200mm rad and installed it in the case.
Mounted the ress in the top.

1 x O-Ring Bundle 10: 11 x 1,6mm (For G1/4)
1 x mod/smart PSU Power connector Pin Female – 20 Stück
1 x mod/smart PSU Power connector Pin Male- 20 Stück
4 x mod/smart SATA Power Connector 90° 16Pin – UV Red
4 x mod/smart SATA Power Connector End For  90° 16Pin – UV Red
1 x Phobya PSU Power Connector 4Pin Molex Male
1 x Phobya PSU Power Connector 4Pin Molex Female
1 x Phobya Fan Power Connector 3Pin
1 x mod/smart ATX Power Connector 24Pin  Black
1 x Phobya Mainboard screw kit Black Edition
1 x Phobya Shroud & Entkopplung 140mm (7mm stark) (Won’t use it)
1 x Teflonband 12mmx10m
2 x Tygon R3603 Tube 12,7/9,5mm (3/8″ID) Clear
2 x Vibrationsdämpfer 120mm Fan Black
1 x Aquacomputer Temperatursensor  G1/4
1 x O-Ring Bundle Stk 10: 11x2mm (für G1/4)
1 x Fillport Black POM Universal
1 x mod/smart Kabelbinder UV-aktiv Red  2,5x100mm 10St.
1 x Alphacool HF SLI Fitting 1 Slot – black
6 x 13/10mm (10×1,5mm) Fittings  90° Turnable G1/4 – kompakt – black mat
8 x 13/10mm (10×1,5mm)  G1/4 – kompakt – black mat
3 x Alphacool HF Doppelnippel G1/4 AG auf G1/4 AG mit O-Ring – Deep
1 x Alphacool HF Y-Verbinder – G1/4 drehbar – 3x Innengewinde – Deep
1 x Aerocool Silent Master 200 – Red LED (200x200x20mm)
1 x Phobya Blende Xtreme (200) – Bricky – Black (won’t use)
1 x Phobya Sticker Alu Dreieckig
1 x Phoba Shround & Entkopplung 120mm (7mm stark) – 2er Set
2 x PrimoChill Knickschutz Smartcoils 14mm (ca 5/8″) UV Red (don’t now if I will use them)
1 x SilverStone 140mm Lüfter Air Penetrator SST-AP141-UV (140x140x25
1 x Phobya Flexible Thread Funnel – Black G 1/4

I will make some more on the case tomorrow, where I have a day off form work 🙂

To Do list:

Make a hole for the Toslink connector.
Fit the pump and the cpu block, maybe the gpus in the case, and see how to run the tubes.

Some photos 🙂

_______
09-05-2013
__

The have now been cleaned, and I have installed a lot of the stuff into it, i have made a hole for the Toslink connector.
I have installed fittings and tubes (its the old tube from the old system, just to see how to run it and so on 🙂 )

Next stop, to order some connectors for the psu, and the made the last cables.
And I need a few more fittings, wish I will order also, then I just need to put the last fittings in, and then run some new tubes and make some cables 🙂